Distributor wanted! F88 camera crane control joystick for pro video pan tilt head for film maker

The Single Man  Operating controller  is made for operating jib by only single man , which is fited the rear side of jib. The user can Operate Jib & head both .

Specifications:

Operation Voltage:12V—15V(max 16V,optional 24V)

Operation Currency:4A(power loss below 0.1A)

Power output per channel:0-12V,0-2A

Currency protection point:2A/channel

Adjustable Impedance:0S—2S

Fuse:10KΩX2

other fuse:10KΩX6

LED indicator:20mA X2

Features:

This Remote pan-tilt controller system is mainly used in movie and TV industry, It can also be used for in monitoring unmanned places of high temperature and radiation. 

1) The joystick is used to control the 2 motors to make the camera turn to any direction you want.

2) The TILT SPEED RANGE and PAN SPEED RANGE is to adjust the maximum revolution of the motor.

3) The TILT CENTER and PAN CENTER are to adjust the center of the joystick on each direction, normally the voltage of the center joystick is 1.65V.

4) The TILT TORQUE and PAN TORQUE is to add the torsion force on each direction.

5) The START RAMP is to adjust the delay time when the motor starts. STOP RAMP is to adjust the delay time when the motor stops. The range is from 0~2 second which is continuously variable.

6) The TILT SHIFT and PAN SHIFT are used in changing the rotational direction of each motor. If you change this switch when pulling the JOYSTICK, the direction won’t be changed immediately until the JOYSTICK returns it’s position and you pull it again.

7) The GREEN LED means the power is in normal status, RED LED means abnormal(please refer to the LED instruction sheet)

2 connectors will come with it.